Function Index
$#! · 0-9 · A · B · C · D · E · F · G · H · I · J · K · L · M · N · O · P · Q · R · S · T · U · V · W · X · Y · Z
M
 Mach, pw::Application
 mapBoundary, pw::Database
 mapHigher, pw::Grid
 mapLinkage, pw::Face
 mapLower, pw::Grid
 MappedSurfaceSubdivisionRatio, pw::DatabaseMesher
 markUndoLevel, pw::Application
 MaxCacheSize, pw::Application
 maximum
 MaximumAspectRatio, pw::DatabaseMesher
 MaximumBendAngle, pw::FaceUnstructured
 MaximumEdgeSpacing, pw::DatabaseMesher
 MaximumExtentsSubdivisions, pw::DatabaseMesher
 maximumSide, pwu::Extents
 MaximumSpacingMode, pw::DatabaseMesher
 MaxIncludedAngle, pw::VolumeMesher
 MaxMeshPolynomialDegree, pw::Application
 MaxSegmentSize, pw::Application
 merge, pw::Merger
 mergeConnectorPair, pw::Grid
 mergeConnectors
 mergePairs, pw::Merger
 MergeTolerance
 MeshCoordinateSystem, pw::Application
 MeshDescription, pw::Application
 MeshLinkSupported, pw::Application
 MeshName, pw::Application
 MeshReferenceArea, pw::Application
 MeshReferenceLength, pw::Application
 MeshReferencePointDescription, pw::Application
 MeshReferencePointX, pw::Application
 MeshReferencePointY, pw::Application
 MeshReferencePointZ, pw::Application
 MeshScale, pw::Application
 MeshType, pw::VolumeMesher
 MeshUnits, pw::Application
 MiddleMode, pw::DistributionGrowth
 MiddleSpacing, pw::DistributionGrowth
 minimum
 MinimumBoundarySubdivisions, pw::DatabaseMesher
 MinimumEdgeSpacing, pw::DatabaseMesher
 MinimumRadiusOfCurvature
 minimumSide, pwu::Extents
 MinimumSpacingMode, pw::DatabaseMesher
 MinimumSubdivisionLength
 mirror, pwu::Transform
 mirroring, pwu::Transform
 mirrorPlane, pwu::Transform
 MirrorPlane, pw::Grid
 Mode
 ModelAssembleTolerance, pw::IOMode
 ModelFromFreeSurface, pw::IOMode
 ModelSize, pw::Database
 modifyAttachmentPoint, pw::Framework
 move, pw::Layer
 MultiGridProlongationFactor
 MultiGridRelaxationFactor
 multiply
pw::Application get/setCAESolverAttribute Mach value
Mach number.
pw::Database mapBoundary < Model | Quilt | SurfaceTrim | Curve > boundary
This action maps a database boundary to a different topology level.
pw::Grid mapHigher coord
This action maps the given grid coordinate to all coords that are immediately higher than the specified coord.
$face mapLinkage linkage domain
This action maps a domain linkage to the face edges.
pw::Grid mapLower ?-includeNodes? coord
This action maps the given grid coordinate to all coords that are immediately lower than the specified coord.
$mesher get/setMappedSurfaceSubdivisionRatio factor
This attribute is the ratio between the number of subdivisions used to detect domains that can be initialized from structured domains.
pw::Application markUndoLevel name
This action saves an undo checkpoint.
pw::Application get/setCAESolverAttribute MaxCacheSize value
Set the max cache size (MB).
pwu::Extents maximum ext
Get the maximum point of an extents box
pwu::Vector2 maximum vec1 vec2
Return a vector that has the maximum components of two vectors
pwu::Vector3 maximum vec1 vec2
Return a vector that has the maximum components of two vectors
$mesher get/setMaximumAspectRatio ratio
This attribute specifies the maximum aspect ratio.
pw::FaceUnstructured get/setMaximumBendAngle angle
This attribute is the maximum bending angle allowed when adding domains to this face, with 0 meaning no maximum.
$mesher get/setMaximumEdgeSpacing spacing
This attribute is the maximum edge spacing for the mesh.
$mesher get/setMaximumExtentsSubdivisions subdivisions
This attribute is the maximum number of mesh subdivisions per the extents of the entities being meshed.
pwu::Extents maximumSide ext
Get the length of the maximum side of an extents box
$mesher get/setMaximumSpacingMode mode
This attribute is the preferred method for setting the maximum spacing.
$mesher get/setMaxIncludedAngle < Automatic | value >
This attribute specifies the maximum included angle quality threshold for T-Rex cells.
pw::Application getCAESolverAttribute MaxMeshPolynomialDegree
Returns an integer specifying the maximum mesh elevation polynomial degree supported by the current CAE solver.
pw::Application get/setCAESolverAttribute MaxSegmentSize value
Maximum size of a connectivity segment in bytes.
$merger merge con1 con2
This action automatically merges two connectors.
pw::Grid mergeConnectorPair con1 con2
This action automatically merges two connectors.
pw::Grid mergeConnectors ?-exclude topology? ?-visibleOnly? -tolerance tol
This action merges connectors within a tolerance.
$merger mergeConnectors ?-exclude topology? ?-visibleOnly? -tolerance tol
This action merges connectors and nodes within the tolerance.
$merger mergePairs
This action merges the pairs that have been marked for merging.
$mesher get/setMergeTolerance tol
This attribute is the tolerance to use when merging connectors.
$splitter get/setMergeTolerance tol
This attribute is the merge tolerance of the mode.
pw::Application get/setCAESolverAttribute MeshCoordinateSystem value
Mesh coordinate system.
pw::Application get/setCAESolverAttribute MeshDescription value
Mesh description.
pw::Application getCAESolverAttribute MeshLinkSupported
This returns a boolean flag that indicates whether the current CAE solver supports the export of MeshLink files.
pw::Application get/setCAESolverAttribute MeshName value
Mesh name.
pw::Application get/setCAESolverAttribute MeshReferenceArea value
Reference area for force/moment calculation.
pw::Application get/setCAESolverAttribute MeshReferenceLength value
Reference length for Reynolds number.
pw::Application get/setCAESolverAttribute MeshReferencePointDescription value
Reference point description.
pw::Application get/setCAESolverAttribute MeshReferencePointX value
Reference point X coordinate.
pw::Application get/setCAESolverAttribute MeshReferencePointY value
Reference point Y coordinate.
pw::Application get/setCAESolverAttribute MeshReferencePointZ value
Reference point Z coordinate.
pw::Application get/setCAESolverAttribute MeshScale value
Mesh global scale.
$mesher get/setMeshType mesh
This attribute controls the mesh type that will be produced.
pw::Application get/setCAESolverAttribute MeshUnits value
Mesh dimensional units.
$dist get/setMiddleMode mode
This attribute is the requested behavior when transitioning from the beginning or ending section of the distribution to the middle of the distribution.
$dist get/setMiddleSpacing spacing
This attribute is the requested spacing when transitioning from the beginning or ending section of the distribution to the middle of the distribution.
pwu::Extents minimum ext
Get the minimum point of an extents box
pwu::Vector2 minimum vec1 vec2
Return a vector that has the minimum components of two vectors
pwu::Vector3 minimum vec1 vec2
Return a vector that has the minimum components of two vectors
This attribute is the minimum number of mesh subdivisions per database boundary.
$mesher get/setMinimumEdgeSpacing spacing
This attribute is the minimum edge spacing for the mesh.
$mesher get/setMinimumRadiusOfCurvature radius
This attribute is the minimum radius of surface curvature to use when resolving curvature along an edge in the mesh.
$tc get/setMinimumRadiusOfCurvature radius
This attribute is the minimum radius of curvature that will be accepted when evaluating curve or surface curvature.
pwu::Extents minimumSide ext
Get the length of the minimum side of an extents box
$mesher get/setMinimumSpacingMode mode
This attribute is the preferred method for setting the minimum spacing.
$mesher get/setMinimumSubdivisionLength length
This attribute is the minimum edge subdivision length in the mesh.
$tc get/setMinimumSubdivisionLength length
This attribute is the minimum distance allowed between points modified by the boundary condition.
pwu::Transform mirror matrix normal dist
Multiply the given transform matrix by a mirroring transform
pwu::Transform mirroring normal dist
Return a transform matrix that is a mirroring of the given plane
pwu::Transform mirrorPlane plane
Return a transform matrix that is a mirroring of the given plane
pw::Grid get/setMirrorPlane plane
This attribute is the mirroring plane applied to the grid at export.
pw::Application getFileTypeAttribute filetype_id Mode
This gets the file type IO modes that support this attribute.
$block get/setExtrusionSolverAttribute Mode < NormalAlgebraic | Path | Rotate | Translate >
This gets/sets the extrusion mode of this block.
$block get/setExtrusionSolverAttribute Mode < NormalHyperbolic | NormalAlgebraic | Path | Rotate | Translate >
This gets/sets the extrusion mode of this block.
$dom get/setExtrusionSolverAttribute Mode mode
This attribute is the extrusion mode of this domain.
$io get/setAttribute ModelAssembleTolerance att_value
Assemble models with the given tolerance.
$io get/setAttribute ModelFromFreeSurface att_value
Automatically converts free surfaces into models with a single quilt and trimmed surfaces.
pw::Database get/setModelSize size
This attribute is the model size of the database used to determine tolerances.
$framework modifyAttachmentPoint <name | index> ?-name new_name? ?-location location? ?-up up_direction? ?-forward forward_direction?
This action modifies an existing attachment point of a framework.
pw::Layer move ?-description? ?-visibility? source_list target_list
This action moves the given source list of layers into the given target list of layers.
$block get/setEllipticSolverAttribute MultiGridProlongationFactor < Default | value >
This attribute is the Prolongation factor of the multi-grid algorithm.
$subgrid get/setEllipticSolverAttribute MultiGridProlongationFactor < Default | value >
This attribute is the Prolongation factor of the multi-grid algorithm.
$domain get/setEllipticSolverAttribute MultiGridProlongationFactor < Default | value >
This attribute is the Prolongation factor of the multi-grid algorithm.
$subgrid get/setEllipticSolverAttribute MultiGridProlongationFactor < Default | value >
This attribute is the Prolongation factor of the multi-grid algorithm.
$block get/setEllipticSolverAttribute MultiGridRelaxationFactor < Default | value >
This attribute is the relaxation factor of the multi-grid algorithm.
$subgrid get/setEllipticSolverAttribute MultiGridRelaxationFactor < Default | value >
This attribute is the relaxation factor of the multi-grid algorithm.
$domain get/setEllipticSolverAttribute MultiGridRelaxationFactor < Default | value >
This attribute is the relaxation factor of the multi-grid algorithm.
$subgrid get/setEllipticSolverAttribute MultiGridRelaxationFactor < Default | value >
This attribute is the relaxation factor of the multi-grid algorithm.
pwu::Transform multiply matrix1 matrix2
Multiply one transform matrix by another
pwu::Vector2 multiply vec1 vec2
Return a vector that is the components of two vectors multiplied together
pwu::Vector3 multiply vec1 vec2
Return a vector that is the components of two vectors multiplied together
Close