$curve offset ?-normal vec? ?-tolerance tol? ?-flip? ?-computedDistance computedDistanceVar? < distance | point > curve

This action sets this curve as an offset from the given curve.

pw::Grid offsetIJK coord < i | ij | ijk >

This action offsets the ijk coordinates of the given grid coordinate.

pw::Database offsetNormal point distance

This action calculates the offset from the given database point in the direction of the normal at the point.

pw::Grid offsetNormal coord distance

This action calculates the offset from the given grid coordinate in the direction of the normal at the coordinate.

pw::Database offsetUV point < u | uv >

This action offsets the uv coordinates of the given parametric database point.

$model orientRelative ?<-outside | -inside>? point

This action orients a model with respect to a point, by doing a closest point projection and reversing the orientation of the model so that the normal matches the inside or outside mode given.

pwu::Transform ortho left right bottom top near far

Create an orthonormal view transform matrix from a view frustum

$solver overrideTRexMaximumLayers entity layers

This action overrides the T-Rex maximum layers setting for a given entity while it is in the current solver.

$solver overrideTRexMaximumLayers entity layers

This action overrides the T-Rex maximum layers setting for a given entity while it is in the current solver.

$subgrid get/setEllipticSolverAttribute OversetAdaptAmplification < Off | On | value >

This attribute sets the strength of the magnet function formed from overlapping block overset data to be applied to a structured block run in the elliptic solver

$block get/setUnstructuredSolverAttribute OversetAdaptAmplification factor

This attribute is the adaption target edge length amplification factor of an unstructured block.

pw::BlockUnstructured get/setDefault OversetAdaptAmplification factor

This default is the adaption target edge length amplification factor of an unstructured block when it is created.

$solver get/setOversetAdaptation value

This attribute controls whether the pw::Solver.run command will perform refinement based on overset assembly length scales.

$subgrid get/setUnstructuredSolverAttribute OversetAdaptTargets target_list

This attribute sets the orphan remediation and interpolation improvement adaption targets to be applied to an structured block run in the elliptic solver.

$block get/setUnstructuredSolverAttribute OversetAdaptTargets <targets>

This attribute sets the orphan remediation and fringe improvement adaption targets to be applied to an unstructured block run in the unstructured solver.

pw::BlockUnstructured get/setDefault OversetAdaptTargets targets

This default is the orphan remediation and fringe improvement adaption targets of an unstructured block when it is created.

$surface patch ?-tolerance tol? ?-surfaceTolerance tol? ?-fitTolerance tol? ?-fitInterior threshold? ?-fitEntities entities? ?-fitted fittedVar? rail1 rail2 rail3 rail4

This action sets the surface by creating a patch between the given rails.

$block get/setExtrusionSolverAttribute PathConnectors <con_list>

This gets/sets a list of connectors for the path.

$block get/setExtrusionSolverAttribute PathConnectors <con_list>

This gets/sets the list of connectors for a path extrusion.

$dom get/setExtrusionSolverAttribute PathConnectors con_list

This attribute is a list of connectors for the path.

$block getExtrusionSolverAttribute PathMaximumSteps

This is the maximum number of steps available as the path extrusion is configured.

$block getExtrusionSolverAttribute PathMaximumSteps

This gets the maximum number of steps available as the path extrusion is configured

$dom getExtrusionSolverAttribute PathMaximumSteps

This attribute is the maximum number of steps available as the path extrusion is configured.

$block get/setExtrusionSolverAttribute PathUseTangent use

This gets/sets the flag indicating if the path extrusion should be rotated tangentally to the path connector.

$block get/setExtrusionSolverAttribute PathUseTangent use_tangent

This gets/sets the flag indicating if the path extrusion should be rotated tangentially to the path connector.

$dom get/setExtrusionSolverAttribute PathUseTangent < Default | bool >

This attribute is the flag indicating if the path extrusion should be rotated tangentially to the path connector.

pwu::Transform perspective left right bottom top near far

Create a perspective view transform matrix from a view frustum

$bc get/setPhysicalType ?-usage type? name

This attribute is the physical type of the boundary condition.

$vc get/setPhysicalType type

This attribute is the physical type of the volume condition.

$shape get/setPivot pivot

This attribute is the location of the transform pivot on the shape.

$shape get/setPivot pivot

This attribute is the location of the transform pivot on the shape.

$shape get/setPivot pivot

This attribute is the location of the transform pivot on the shape.

$block get/setExtrusionSolverAttribute PlaneAngleTolerance < Default | tolerance >

This specifies the angle tolerance for determining when an arbitrary plane BC is considered equal to a Cartesian plane BC.

$block get/setExtrusionSolverAttribute PlaneAngleTolerance tolerance

This specifies the angle tolerance for determining when an arbitrary plane BC is considered equal to a Cartesian plane BC.

$block get/setExtrusionSolverAttribute PlaneDeviationTolerance < Default | tolerance >

This specifies the deviation tolerance for determining when an arbitrary plane BC is considered to be planar.

$block get/setExtrusionSolverAttribute PlaneDeviationTolerance tolerance

This specifies the deviation tolerance for determining when an arbitrary plane BC is considered to be planar.

$entity get/setRenderAttribute PointMode mode

This attribute is the point mode for rendering an entity.

pw::Application get/setCAESolverAttribute PointPrecision value

Controls the export of face sets and zones.

$io get/setAttribute PointwiseCompatibilityMode att_value

Export the file using Pointwise extensions.

$shape polygon -points vectors ?-slope type? ?-length value?

This action sets the shape to a polygon.

$shape polygon -points vectors ?-slope type? ?-length value?

This action sets the shape to a polygon.

$shape polygon -points vectors ?-slope type? ?-length value?

This action sets the shape to a polygon.

$block get/setHighOrderSolverAttribute PolynomialDegreeMax value

Specifies the polynomial degree for constant order mesh elevation or the maximum polynomial degree for mixed order mesh elevation.

pw::Block get/setDefault PolynomialDegreeMax value

The default max polynomial degree value assigned to a block when it is created.

$block get/setHighOrderSolverAttribute PolynomialDegreeMin value

Specifies a minimum polynomial degree for mixed order mesh elevation.

pw::Block get/setDefault PolynomialDegreeMin value

The default minimum polynomial degree value assigned to a block when it is created.

pw::Script processServerMessages ?-authentication code? ?-allowRemote allow? ?-timeout seconds?

This action processes incoming messages to the Glyph Server, which allows executing Glyph commands in Pointwise over a TCP port.

$con project ?-type proj_type? ?-direction direction? ?-center center? ?-axis point normal? ?-fit tolerance? ?<-interior | -shape>? ?dbentities?

This action projects this connector onto one or more database entities.

$curve project ?-type proj_type? ?-direction direction? ?-center center? ?-axis point normal? ?-fit tolerance? ?-interior? ?dbentities?

This action projects this curve onto one or more database entities.

$dom project ?-type proj_type? ?-direction direction? ?-center center? ?-axis point normal? ?<-interior | -shape>? ?dbentities?

This action projects this domain onto one or more database entities.

$dom project ?-type proj_type? ?-direction direction? ?-center center? ?-axis point normal? ?-interior? ?dbentities?

This action projects this domain onto one or more database entities.

$solver project

This action projects the domains in the solver to the databases.

pw::Entity project ?-type proj_type? ?-direction direction? ?-center center? ?-axis point normal? ?-fit tolerance? ?<-interior | -shape>? entities ?dbentities?

This action projects the given entities onto database entities.

pw::GridEntity project ?-type proj_type? ?-direction direction? ?-center center? ?-axis point normal? ?-fit tolerance? ?<-interior | -shape>? entities ?dbentities?

This action projects grid entities onto database entities.

$srcCrv project ?-type proj_type? ?-direction direction? ?-center center? ?-axis point normal? ?-fit tolerance? ?-interior? ?dbentities?

This action projects this source curve onto one or more database entities.

$solver project

This action projects the domains in the solver to the databases.

pwu::Plane project point

Get the closest point projection of a point onto a given plane

pw::Application get/setCAESolverAttribute ProjectDescription value

The grid project description written to the inp file.

$segment projectInterior

This action projects the segment shape onto the surface it is defined on, which may require adding points and/or switching the slope type.

pw::Display get/setProjection < Perspective | *Orthonormal* >

This attribute is the type of projection of the display.

$segment get/setProjectToCommon project

This attribute controls whether the segment should be automatically projected to a database entity if all of the control points are constrained to the same database entity.

$block pushAttributes

This action pushes the block’s attributes onto the match domains if the TRexPushAttributes attribute is true.

$block get/setUnstructuredSolverAttribute PyramidAspectRatio ratio

This attribute is the pyramid aspect ratio of an unstructured block.

pw::BlockUnstructured get/setDefault PyramidAspectRatio ratio

This default is the pyramid aspect ratio of an unstructured block when it is created.

$block get/setUnstructuredSolverAttribute PyramidMaximumHeight height

The maximum pyramid height of an unstructured block

pw::BlockUnstructured get/setDefault PyramidMaximumHeight height

This default is the maximum pyramid height of an unstructured block when it is created.

$block get/setUnstructuredSolverAttribute PyramidMinimumHeight height

This attribute is the minimum pyramid height of an unstructured block.

pw::BlockUnstructured get/setDefault PyramidMinimumHeight height

This default is the minimum pyramid height of an unstructured block when it is created.

$io get/setAttribute PyramidStyle att_value

Set Pyramid Style for Nastran.